Air Flow
3D Auto Airflow
One touch program that operates three independent motors which effectively distributes an even airflow across the entire room.
Auto Louvre Mode
Depending on whether the unit is in heating or cooling mode this will automatically set the louvre at the optimum angle for even air distribution.
Jet Air Technology
Advanced fan blade technology, used in the development of jet engines, efficiently delivers powerful yet quiet and evenly distributed airflow.
Memory Louvre
Set the louvre at the desired angle. Unit will automatically return the louvres to this position on every subsequent start up.
Right/Left Louvre Swing
The vertical louvres will automatically swing left and right for even air distribution.
Up/Down Louvre Swing
The horizontal louvres will automatically swing up and down for even air distribution.
Clean Air
Allergen Clear Operation
Multi-stage operation that activates enzymes in the specially designed filter, neutralising and suppressing airborne allergens such as pollen, dust and hair.
Photocatalytic Deodorizing Filter
Easy to clean filter that catches airborne allergens and particles before neutralising odour causing bacteria within them.
Removable Cover
Removable front cover allowing access for easy cleaning and maintenance.
Self-Clean Operation
Dries the indoor unit and filter, preventing the growth of mould. Designed to be run regularly after use.
Comfort and Convenience
Child Lock
Lock the remote control to prevent little ones from changing functions and other settings. Useful for families with curious young children.
Comfort Start-up
When using the ON-TIMER function, the unit will switch on slightly earlier than the SET time, to ensure the optimum temperature is reached at the ON TIME.
Dry Operation
Reduces humidity by removing moisture from the air without effecting indoor temperature.
Hi Power Operation
Provides 15mins of boosted power to quickly heat or cool your home before returning to normal operation. Perfect for when you first turn on it the unit. Note: For FDE, FDT, FDTC, FDUA, and FDUM series can only be enabled using the RC-EX3 wired controller.
Night Setback
Designed for the colder seasons, this function ensures the room temperature is kept at around 10˚C, even while unoccupied.
On/Off Timer
Set your unit to turn on and off once, at specific times, within a 24 hour period. Unit will then turn on and off at the specified times every day.
Positioning of Installation
Manually set the horizontal airflow direction to ensure even air distribution in situations where the indoor unit is installed in close proximity to a wall.
Preset Operation
The desired preset operation mode can be enabled with a single touch of a button.
Silent Operation
Set periods of time where the unit will operate with reduced noise levels, perfect for night time and an uninterrupted sleep.
Sleep Timer
Set a pre-determined amount of time between 30 and 240 mins that your unit will operate for before switching off.
Weekly Timer
Set your unit to turn on and off at specific times for each day of the week to suit your needs.
Energy Saving
Eco Mode
Unit operates at slightly reduced capacity to reduce power consumption while maintaining a comfortable room temperature.
Fuzzy Auto Mode
Using fuzzy logic algorithms, the unit determines the operating mode and temperature settings automatically and adjusts the inverter frequency.
Maintenance
Auto Restart Function
If there is a temporary loss of power, when power is restored, the unit will automatically restart in the same operating mode it was in.
Microcomputer-Operated Defrosting
Automatically activated during low ambient temperatures to prevent the frosting of the outdoor heat exchanger.
Self-Diagnostics
In the unlikely event of a fault the internal microcomputer automatically runs a diagnostic of the system. This enables a service agent to quickly isolate and repair any issues.
